Description

Product technical parameters
●Power source: DC 3V( 2 Section 7 alkaline batteries)
●Measurement range: 32.0℃ ～43.0℃
●Display resolution: 0.1℃
●Measurement accuracy: ±0.2℃ in the range of 35.0℃～42.0℃±0.3℃in the range of 32.0℃～34.9℃ and 42.1℃～43.0℃
●Electric shock protection: the device is supplied by internal power
●Applied part: BF Type
●Running mode: continuous running
●Temperature units: ℃/℉
●Degrees of protection against ingress liquid: IP20 (solid foreign matter whose diameter are greater than or equal to 12.5mm can be prevented from entering, no protection against ingress liquid)
●Safety classification: the device that cannot be used in the presence of flammable anesthetic gases mixed with air or oxygen or nitrous oxide
●Product size: 149×38×42(mm)
●Product weight: about 68g (not including cell)

Transportation and storage environment conditions:
Ambient temperature range: -20℃~+55℃
Relative humidity range: 15%~90%RH, Non-condensing
Atmospheric pressure range: 70kPa~106kPa

Precaution Before Use:
— Please read the attached instruction carefully before use.
— If there is temperature difference compared environment of the device storage with that of the measuring environment, place the device in the measuring environment for more than 30 minutes, otherwise there may be error for the measurement result.
— The measurement result is only for reference, which is not a substitute for a physician’s diagnosis. It is very dangerous to self-judge and treat only based on the measurement result. Please follow the doctor’s instructions.
— Do not expose the thermometer to sunlight or to water.
— Before measurement, please make sure that there is no sweat, cosmetics or oil stains on the forehead of subject.
— Allow one minute interval between two measurements.